Construction equipment has many uses that we do not normally think about. They are versatile, strong, durable and extended in size. They are very useful in the construction process and it is evident that there are many ways of construction had been enhanced by these machines.
Common examples are as follows:
This is a huge, heavy piece of machinery that can carry loads and pull them around. They are also very powerful and fast.
These are smaller and lighter than Caterpillar trucks but still work in the same capacity as a truck would. They move around quickly, but they can’t move as much weight as a Caterpillar truck can.
A dump truck is a huge vehicle that can hold large amounts of material at once and dump it all at once! They are often used to collect garbage for disposal purposes or to move materials from one place to another quickly and efficiently.
These are used for digging up large amounts of dirt or rock from the ground so that they can be placed elsewhere or used in another way later on down the line after being dug up by this type of vehicle.
They usually have very long arms attached to them which help them dig into certain areas better than others do.
Excavators have a bucket that can be filled with material, which is then dumped into the truck’s scoop. The excavator’s bucket also has a ramp that allows it to climb up and down hills.
Asphalt pavers are a type of heavy construction equipment used to level and compact the surface before paving. They can also be used to remove excess soil and debris from the site.
Backhoe loaders are typically used for moving large quantities of earth from one place to another, often in conjunction with other heavy construction equipment such as earthmovers or shovels.
A boom lift is a piece of heavy equipment that can be used to lift and transport heavy objects. They are often used by companies to move large pieces of machinery, as well as other large items. They have a boom arm attached to a platform with wheels, and they can be used to lift to 5 tons.
A cold planer is a machine that cuts the wood into lumber with a series of knives mounted on a rotating table. The knives are covered with water to cool down the blades so that they can cut through wood more easily.
This type of machine has been used by humans for thousands of years because it allows us to cut down trees to make use of their wood for building purposes.
Compactors are machines designed specifically for cutting up the trash into smaller pieces. Unlike most other types of machines, compactors don’t have any moving parts or parts that can be damaged by water or dirt – instead, all of their parts are made out of plastic to keep them clean and safe from damage while they work.
Compactors are mechanical devices that compress soil so that it can be used as fill material (such as gravel). Compactor machines use high-pressure water or air to compress soil into smaller pieces that can be transported easily by truck or train.
The tower crane is a very specific type of crane that uses a tower to raise and lower its load. A tower crane is a type of crane that lifts materials by using a series of pulleys to lift the material up and then lower it back down.
They are used to move large, heavy objects, such as cement blocks or other construction materials. Tower cranes can be found in many different applications, including mining, mining support, oil drilling, and more.
A paver is a type of material handler that moves paving stones from one place to another. Paving stones are used in the construction industry to cover sidewalks and driveways. Paver cranes are typically used for paving projects that are larger than what can be done with an ordinary forklift truck or other smaller material handler.
Paver cranes are similar to tower cranes in that they move materials from one place to another by extending their booms into the air. However, instead of being designed to lift heavy items like towers, paver cranes are designed for moving small objects such as bricks or concrete blocks around an area.
A feller buncher is another kind of material handler that moves large amounts of concrete or other construction materials from place to place within a building site or work area. Feller bunchers can also be used for moving soil from one place to another on a construction site or inside an underground tunnel system during excavation work.
Feller bunchers are the opposite of tower cranes; instead of lifting heavy objects upwards, they pick up large rocks or boulders and drop them down on top of something else, usually another rock or boulder, so that it can be crushed into smaller pieces.
Wheel tractors are used for the removal of all types of plant material, including rocks, roots and stumps. They are typically used to clean up after construction projects, but they are also found in rural areas where they are used to clear snow from roads.
The scraper blade is attached to the front of the tractor and scrapes out the ground in front of it. The wheels act as an extension of the blade, so that when you turn, the scraper pushes itself forward into the ground.
Trenchers are used for digging up hard ground surfaces like asphalt and concrete. The trencher uses its blades to cut through the surface and remove it from the ground. They’re so large, most trenchers are powered by tracks with wheels on them.
Trenchers also use their traction to compact soil and loosen compacted topsoil. It can also be used for grading, which is the process of levelling land by removing any irregularities in elevation.
Loaders are used to lift heavy objects onto flatbed trucks or other vehicles. A loader loads material onto a conveyor system or trucks for transport elsewhere.
Loaders have different functions depending on their size, but all have one purpose: to move material from one place to another more efficiently than human beings could do themselves.
Backhoes are heavy equipment that digs up the ground for other machines to move or access. They are used for digging large trenches, moving earth in construction projects, and grading land for new roads or building foundations. Backhoes can be attached to a truck or tractor, but they are usually operated by one person.
Bulldozers are used mainly in construction projects. They are heavy equipment that digs up large areas quickly and efficiently. They can also be used to load materials onto flatbed trucks so they can be transported elsewhere.
Dozers are large machines used to remove debris and soil from construction sites. Dozers are also used to move earth in the construction of roads and highways, including the removal of topsoil or the excavation of rock.
Dozers may have a bucket, scoop, or blade at the front end, which can be used to remove material from within a trench or hole. They are usually powered by a diesel engine or electric motor.
A grader is an implement used to smooth out surfaces such as ground or pavement by removing irregularities caused by rocks or other obstacles. Graders are commonly used at construction sites where there are lots of rocks and other materials that need to be removed from the area to make it easier for workers to do their jobs.
Concrete pumps are used to pump concrete from a source to a destination. They are also often used to mix aggregate and water. It is a closed-loop system that uses a motor to move the mixer, which mixes the water and cement powder. It has a fixed speed and can be used to mix concrete in batches.
The motor grader is used for grading and levelling the ground. It has a vibration generator that rotates the machine back and forth over the ground at high speeds so that it can remove any rocks or other debris from the ground. The machine is also used for removing rock from roads or driveways.
A wheel loader is a type of mechanical equipment that moves heavy objects. Wheel loaders are designed to be able to lift and transport loads in a variety of configurations, including single-unit, tandem, and three-unit configurations.
Wheel loaders can be used for loading and unloading materials at warehouses, construction sites, factories, and other industrial facilities.
A truck crane is a type of mechanical equipment that moves heavy loads by lifting them and down from one point to another using an extendable arm called a boom.
Truck cranes are often used in construction sites or during large-scale building projects where there is a need for lifting heavy objects or materials into position.
A forklift is a type of mechanical equipment that can lift and move heavy loads with relative ease. Forklifts are available in single-unit models as well as three-unit models.
A forklift is a lifting machine that consists of two parallel forks that can be raised and lowered with handles located on both sides of the frame. Forklifts are similar to wheel loaders, except they move materials up an incline.
Draglines are large machines used to excavate materials such as gravel, sand, and clay. These machines use a series of buckets attached to a boom (or “drag”) that allows them to scoop up the material and deposit it in a pile at the side of the machine.
The material that is removed is then tamped down by another machine called a compactor (or “elevator”) so that it can be moved more easily by truckload trucks or railway cars.
Drills are used for drilling holes in the ground for pipes or other structures. Drills typically have either an auger bit with an adjustable shoe that can be adjusted to different levels or an abrasive wheel for cutting through softer materials like concrete or brickwork.
A scissor lift is a type of vehicle that can be used to lift heavy machinery and supplies. It has two sets of wheels in the form of scissor-shaped platforms, which are connected by a set of levers that control the height at which the platform can move. The lift can be manually operated or powered by electricity.
A skid steer loader is a vehicle that has a front-mounted engine and driveshaft connected to a rear engine and axle assembly. The front portion of the machine is mounted on skid shoes, allowing it to handle low-friction surfaces such as sand or snow. Skid steers load and unloads materials essentially.
A telehandler is a type of vehicle that uses hydraulics to raise or lower itself from its base and move between locations by hoisting or lowering attachments and attachments attached to other attachments. The telehandlers move materials between locations.
Track loaders are the most common kind of loader in the mining industry, construction, and agricultural industries. They’re used for both underground mining and hydraulic mining. They’re also quite versatile, able to be used both on land and underwater.
They are used mainly in mining. Some models are designed for lifting heavy loads over long distances, while others are designed for lifting small loads over short distances. They have a track on the front that allows them to move along rails or a flat surface.
Underground Mining Loaders are used to dig trenches in the ground for underground mining operations. They may be used for excavation or loading materials into vehicles for transport.
They have a large bucket that can be filled with water or other liquids and then emptied from the top of the bucket when needed.
Hydraulic Mining Shovels use hydraulic power to provide the force required to excavate earth. They have an arm with a handle on one end and a bucket mounted on another end. The shovel has two buckets: one at the bottom of the arm and another at the top of the arm where it meets with its handle.
When hydraulic power is applied, the liquid is pumped through tubes connected to each bucket’s nozzle, causing each bucket’s nozzle to spray out liquid when activated by hand pressure from its operator (or other machines).
Electric rope shovels are also commonly used as light towers, but they have an electric motor that turns an auger that digs into the ground to lift dirt. They use an electric motor to power their digging action, which can be controlled via push-button controls or by remote control.
The electric rope shovel is faster than other types of light towers, but it’s more costly and requires more maintenance.
The drum rollers are used to lift and lower heavy loads. They are also used to rotate large objects so that it does not damage the surface on which it is being lifted. The drum rollers are the most common type of towable light tower. They’re designed to move on their own and can be towed by a tractor or truck.
Towable light towers are used to provide lighting for large areas. Towable light towers are also used to transport heavy lights onto stage sets or other locations. They can also be used in film production, where they are often used to illuminate sets.
Towable light towers come in different sizes and shapes, depending on what you need them for. The larger the tower, the more powerful it will be, but it will also cost more money to buy.
Dump Trucks are used for transporting waste material from one location to another. They are often used to transport waste from the landfill to a recycling centre or even an incinerator. The material can be anything, but it’s typically dirt, gravel, and other construction-related materials.
In other words; Dump trucks are used to load and unload truck beds. They can be used to move material from place to place, as well as to empty the bed of material.
Pile Boring Equipment consists of a drill with a boring attachment and a series of cutting blades called mauls. It is used in construction, mining, and civil engineering. It’s essentially used to make holes in piles of soil or rock so that they can be used as foundations for structures.
Pile driving equipment is used to drive piles into the ground to hold up walls or roofs. Pile Driving Equipment consists of two sets of shears that cut off the top portion of a pile. The top portion is then used as a foundation for new piles, which may be driven into place using hydraulic jacks or other means depending on the size and type of pile being driven.
A skidder is a machine that can be used to pull or drag large pieces of material. The skidder is designed to lift and place materials on the ground, such as logs and other large materials. The skidder can be used to move materials between locations, such as loading them onto trucks or railcars.
The harvester machine is used to cut down trees and other plants that are in their natural state to harvest the wood from these plants. These machines are typically large, heavy-duty machines with powerful motors and sharp blades that cut through the trees.
A pile driver is a machine that uses long steel rods to drive piles into the ground for construction projects or other large projects where a large amount of concrete needs to be poured into the ground.
Heavy construction equipment is used to aid in the construction of homes, buildings, and all other types of construction as well. The heavy construction equipment we have today is not just the same as what was created years ago, these machines have innovated as much with their design as they have with their materials.
They work as a supplement to hand tools, providing durability and muscle, and also acting as a safety precaution for workers. These are machines that are made to last and endure rough situations, often seeing wear and tear on their bodies through just one use in the field.
Ship A Car (SAC) will ship any and all heavy equipment including everything that is listed above. Call to speak with an experienced heavy haul expert at (866) 452-3657 and request your free quote.
